Features
Optimal design of boom-&column-structure ,Inner hydraulic oil tank renders a compact placement.
The key components of hydraulic- and electrical-system are from world famous brand,which ensure safety and stability.
High Strength Concrete Placing Boom / Boom Pressure Pump Standard Types
For option:
1. Standard types without counter weight
2. Floor or shaft climbing
3. Step speed or stepless speed(proportional control)
4. Column length:5m,8m,10m
5. Delivery pipes for option as project budget:
⑴ Ordinary single straight pipe and cast steel bend,service life not more than 20,000m3 ；
⑵ High wear resistance double straight pipe and bend,service life not less than 50,000m3；
| Technical Specifications |
| Model of placing boom | HGY33S-4R | HGY33P-4R | HGY33SC-4R | HGY33PC-4R |
| Performance | Max. radius (m) | 33 |
| Free standing height,Slewing range | 22.7m,400° |
| Working temperature(℃) | 0～60℃ |
| Counter weight(kg) | / | 2930 |
| Total weight(kg) | 22300 | 25230 |
| Supply power to equipment | 380V/50Hz |
|
|
|
|
|
|
|
| Electric motor | Motor model | Y2-200L-4 |
| Power(kW) | 30 |
| Hydraulic system | System pressure(MPa) | 32 |
| Flow(L/min) | 34 | 47 | 34 | 47 |
| Oil tank capacity(L) | 280 |
| Control mode | (Cable+Radio) remote control |
| Clearing mode for concrete pipe | Water clear / Dry clear |
| Section of tubular column (m×m) | 0.75×0.75 |
| Arm(Booms) | Boom model | fully hydraulic foldable arms |
| Delivery pipeline diameter | DN125mm |
| Length of end hose (〃×m) | 5〃×3 |
|
|
|
|
|
|
|
|
|
|
|
|
| The first section | Length(m) | 9.3 |
| Articulation | -2.5°～82.5° |
| The second section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| The third section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| The forth section | Length(m) | 7.9 |
| Articulation | 0°～180° |
| Climbing | Climbing mode | Cylinder Jack Lifting |
| Internal climbing step distance(m) | 0.52 |
| Floor frame | Hole prepared in floor |
| Shaft frame | Size of climbing shaft : 2.0m-2.7m |
| Min. space between internal climbing frame | Climbing(m) | 3 |
| Placing concrete(m) | 6 |
| Rest(m) | 6 |
The importance of hydraulic oil for concrete placing boom
By observing the level gauge installed on the side of the hydraulic tank, we can judge whether the hydraulic oil quantity is enough.If the amount of hydraulic oil is seriously insufficient, it will cause the pump to empty, resulting in the burning of the pump, can not establish pressure and make the hydraulic system paralyzed. The solution is: regular inspection, timely filling oil.
Hydraulic oil is not clean (contaminated), will make the hydraulic system components work abnormal.For example, the hydraulic valve can not normally lock and cause internal leakage; Pump pressure can not cause insufficient system pressure and so on.Solution: first, all the placing boom back to the transport state, so that most of the hydraulic oil flow back to the tank; Then open the drain plug at the bottom of the tank, discharge all the contaminated hydraulic oil, and thoroughly clean the inside of the tank; Install the bottom plug (no leakage) and fill the tank with clean hydraulic oil to full scale.
About the model
HGY ×× S or P C or blank - × R
① ② ③ ④ ⑤
① Hydraulic concrete distributor
② Round number of Max.radius(m)
③ Step speed regulation(S)or
Proportional control speed regulation(P)
④ With(C)or without(blank) counter weight
⑤ Arm section number ×Roll folding(R)
【Identification letter description】
S: Step-speed adjustment
P: Proportional (Stepless speed regulation)
C: Counter weight
【The sample】
1. Model HGY33S-3R means:
Without counter weight,max.radius 33m,step speed regulation and 3 roll-folding arms.
2. Model HGY33PC-4R means:
With counter weight,max.radius 33m, proportional control speed regulation and 4 roll-folding arms.
Product Tags:
|
|
High Strength Concrete Placing Boom / Boom Pressure Concrete Machine Column Standard Types Images
|
